The cordierite‐bearing anatectic rocks of the higher Himalayan crystallines (eastern Nepal): low‐pressure anatexis,melt productivity,melt loss and the preservation of cordierite     

C. GROPPO  F. ROLFO  P. MOSCA 《Journal of Metamorphic Geology》2013,31(2):187-204

Cordierite‐bearing anatectic rocks inform our understanding of low‐pressure anatectic processes in the continental crust. This article focuses on cordierite‐bearing lithologies occurring at the upper structural levels of the Higher Himalayan Crystallines (eastern Nepal Himalaya). Three cordierite‐bearing gneisses from different geological transects (from Mt Everest to Kangchenjunga) have been studied, in which cordierite is spectacularly well preserved. The three samples differ in terms of bulk composition likely reflecting different sedimentary protoliths, although they all consist of quartz, alkali feldspar, plagioclase, biotite, cordierite and sillimanite in different modal percentages. Analysis of the microstructures related to melt production and/or melt consumption allows the distinction to be made between peritectic and cotectic cordierite. The melt productivity of different prograde assemblages (from two‐mica metapelite/metagreywacke to biotite‐metapelite) has been investigated at low‐pressure conditions, evaluating the effects of muscovite v. biotite dehydration melting on both mineral assemblages and microstructures. The results of the thermodynamic modelling suggest that the mode and type of the micaceous minerals in the prograde assemblage is a very important parameter controlling the melt productivity at low‐pressure conditions, the two‐mica protoliths being significantly more fertile at any given temperature than biotite gneisses over the same temperature interval. Furthermore, the cordierite preservation is promoted by melt crystallization at a dry solidus and by exhumation along P‐T paths with a peculiar dP/dT slope of about 15–18 bar °C^?1. Overall, our results provide a key for the interpretation of cordierite petrogenesis in migmatites from any low‐P regional anatectic terrane. The cordierite‐bearing migmatites may well represent the source rocks for the Miocene andalusite‐bearing leucogranites occurring at the upper structural levels of the Himalayan belt, and low‐P isobaric heating rather than decompression melting may be the triggering process of this peculiar peraluminous magmatism.  相似文献   

Effect of spatial variability of cross‐correlated soil properties on bearing capacity of strip footing     

Sung Eun Cho  Hyung Choon Park 《国际地质力学数值与分析法杂志》2010,34(1):1-26

Geotechnical engineering problems are characterized by many sources of uncertainty. Some of these sources are connected to the uncertainties of soil properties involved in the analysis. In this paper, a numerical procedure for a probabilistic analysis that considers the spatial variability of cross‐correlated soil properties is presented and applied to study the bearing capacity of spatially random soil with different autocorrelation distances in the vertical and horizontal directions. The approach integrates a commercial finite difference method and random field theory into the framework of a probabilistic analysis. Two‐dimensional cross‐correlated non‐Gaussian random fields are generated based on a Karhunen–Loève expansion in a manner consistent with a specified marginal distribution function, an autocorrelation function, and cross‐correlation coefficients. A Monte Carlo simulation is then used to determine the statistical response based on the random fields. A series of analyses was performed to study the effects of uncertainty due to the spatial heterogeneity on the bearing capacity of a rough strip footing. The simulations provide insight into the application of uncertainty treatment to geotechnical problems and show the importance of the spatial variability of soil properties with regard to the outcome of a probabilistic assessment. Copyright © 2009 John Wiley & Sons, Ltd.  相似文献   

起始方位角误差对附合导线平差结果的影响   总被引：1，自引：0，他引：1  

张景湘  马捷  赵龙平 《测绘科学技术学报》2006,23(1):62-64,68

附合导线是工程测量中最常见的布网形式.结合附合导线平差过程,文中用真误差分析方法推导了起始方位角误差对附合导线平差结果的影响公式;通过分析与数据计算,得到了起始方位角误差对平差后导线点坐标和导线边方位角的影响规律;并与测角误差影响进行比较,得出了起始方位角误差影响可忽略的条件,对导线测量的理论研究与生产实践具有参考意义.  相似文献   

岩石锚桩基础的承压力与抗拔力之应用   总被引：1，自引：0，他引：1  

黄皖平 《安徽地质》2005,15(4):318-320

根据“110kV绩溪-旌德”线路现场设计及施工情况,系统总结了岩石锚桩基础在中风化、强风化的山区中的应用经验,分析了工程设计中锚筋内力、锚桩承载力和粘结力之间关系,合理采用计算公式,获得较好效果。  相似文献   

Experimental Study on Stability of Breakwaters with Penetrating Box Foundations     

别社安  李伟  李增志  任增金  及春宁 《中国海洋工程》2003,17(1)

1 .ＩｎｔｒｏｄｕｃｔｉｏｎＴｈｅｐｅｎｅｔｒａｔｉｎｇｂｕｃｋｅｔａｎｄｂｏｘｆｏｕｎｄａｔｉｏｎｉｓａｎｅｗｔｙｐｅｏｆｓｔｒｕｃｔｕｒｅ ,ｗｈｉｃｈｈａｓｂｅｅｎａｐｐｌｉｅｄｉｎｍａｎｙｅｎｇｉｎｅｅｒｉｎｇｆｉｅｌｄｓ .Ｉｎｖｉｅｗｏｆｔｈｅｈｉｇｈｃｏｎｓｔｒｕｃｔｉｏｎｃｏｓｔａｎｄｔｈｅｆｏｒｍｉｄａｂｌｅｃｏｎｓｔｒｕｃｔｉｂｉｌｉｔｙｏｆｏｆｆ ｓｈｏｒｅｐｌａｔｆｏｒｍｓｗｉｔｈｐｉｌｅｄｆｏｕｎｄａｔｉｏｎｓ ,Ｂａｅｒｈｅｉｍｅｔａｌ.(1 990 )ｐｒｏｐｏｓｅｄｔｈｅｃｏｎｃ…  相似文献   

复合加载模式作用下地基承载性能数值分析   总被引：11，自引：3，他引：11  

栾茂田  赵少飞  袁凡凡  吕爱钟  武科 《海洋工程》2006,24(1):34-40

确定竖向荷载(V)、水平荷载(H)和力矩(M)共同作用下建筑物地基的破坏模式及在荷载空间(H,V,M)中的破坏包络面是地基设计中的关键问题。为提高Swipe试验方法计算精度,提出了改进方案,进而利用有限元方法分析了复合加载模式作用下均质粘性土地基上条形基础的破坏包络面。计算表明,基于改进Swipe试验方法的数值模拟结果明显好于常规Swipe试验方法。针对海洋工程中实际复合加载模式的特点,探讨了竖向荷载分量V对地基破坏模式和H-M荷载平面上的破坏包络线的影响,结果表明竖向荷载分量显著地改变了地基的破坏模式及包络线的形状。  相似文献   

真空预压联合碎石桩加固港口吹填堆场地基的试验研究     

丛建  曹永琅  杨成军 《海岸工程》2007,26(1):41-47

在港口工程建设中,快速加固超软弱的吹填地基,采用真空预压法是一个经济有效的方法,再联合以碎石桩加固则能进一步提高地基的承载力、减少地基工后沉降.通过真空预压联合碎石桩加固地基的现场试验以及观测资料的分析,得出真空预压联合碎石桩加固后地基的承载力特征值由原天然地基的60 kPa左右提高到220 kPa,计算结果表明打碎石桩后的地基变形模量Esp与真空预压后的Ea相比提高了1倍,联合碎石桩加固后的地基沉降量比仅经过真空预压的地基减少1/3.  相似文献   

深层搅拌法在超软弱港口地基上的工程应用     

曹永琅  毛元平  丛建 《海岸工程》2003,22(1):8-13

某港口堆场地基上部5．0m系吹填而成，地表下18m范围均属软土，经真空预压初级加固后地基承载力仅在80—90kPa，局部区域上部淤泥土层土性指标较差，含水量大于50％，地基承载力不足60kPa。为了使地基达到230kPa的承载要求，设计采用深层搅拌法加固超软弱地基。通过现场成桩工艺试验和检测表明，桩身水泥土强度在90d龄期时大于1．80MPa，单桩承载力标准值大于150kN，以φ600桩径、桩长13．5m、置换率为0．308和φ500桩径、桩长13．5m、置换率为0．267两种方案布置的复合地基承载力标准值均超过了230kPa的设计要求。试验结果表明，深层搅拌法在港口超软弱地基土应用只要施工工艺适当，完全可以使地基承载力提高2—3．5倍以土，从而节省大量的工程投资。  相似文献   

Estimation of Axial Pile Bearing Capacity According to Shear Strength Parameters of Soil     

Yu Xiaodong  Yan Shuwang Sun Wanhe Postgraduate Student  Tianjin University  Tianjin Professor  Tianjin University  Tianjin Senior Engineer  Tianjin Port Engineering Institute  Tianjin 《中国海洋工程》1997,(2)

At pesent,it is very popular to estimate pile bearing capacity by use of empirical formula andphysical indexes of soil provided in the design codes for civil construction in China.This paper attempts toapply mechanical indexes of soil and semi-empirical formulas,which are based on soil mechanical theoriesand were summarized and presented by Meyerhof in 1976,to calculate the axial pile bearing capacity.Lo-ading test results of 24 single piles in Tianjin area have been collected and compared with the proposed cal-ulation approach.  相似文献   

Behavior of Pile Groups under Lateral Load   总被引：2，自引：0，他引：2  

Yang Keji  Li Qixin Wang Fuyuan Associate Proferssor  Hehai University  Nanjing Engineer  Hehai University  Nanjing 《中国海洋工程》1991,(2)

Based on investigation and model tests, and in combination with the research work on group effect for pile groups under lateral loads relating to the code of fixed offshore platforms, a series of studies have been performed on the behavior and failure mechanism of laterally loaded pile groups, critical pile spacing inducing group effect, lateral bearing capacity of pile groups and its main influence factors, the stress-strain relationship for single piles and pile groups and so on. Some new laws about non-uniformity of load distribution in the longitudinal direction of pile groups and load-deflection (p - y) curves for pile groups have been discovered, and an empirical formula is presented in order to remedy the defect of current calculating methods at home and abroad. These results can be used for reference in the design of pile foundation under lateral loads.  相似文献